modular system multiple vertical cable management options install easily and allow user to configure system to their preferences mounts as 19" or 23" eia rack suitable for a variety of applications rack space identification allows for quick and easy location of rack spaces, speeding (numbered at every fifth position) installation of horizontal rack mount items fully bonded structure two hole lug attachment simplifies grounding to assure proper grounding technique 1500 lb. load rating accommodates large networking equipment deep vertical channel provides pathway for distribution cable open rear channel provides easy access to cables inside of vertical channel simplifying moves, adds, and changes optional hinged metal door provides easy access to vertical pathway without having to completely remove door integral waterfalls provides bend radius control for cables as they go to the front and inside of the vertical channels pass through holes located on front and side to allow access from the patching surface to the back of equipment as well as between racks www.panduit.com dimensions: nfr84 (19") ? 86.0"h x 28.4"w x 17.0"d (2183mm x 721mm x 432mm) nfr84 (23") ? 86.0"h x 32.4"w x 17.0"d (2183mm x 823mm x 432mm) standards: meets all eia requirements as defined in eia-310-d packaging: packaged with two vertical channels, top and bottom brackets, assembly hardware that bonds the rack and installation instructions key features and benefits applications technical information specifications cable management rack shall be constructed of steel and capable of mounting as 19" or 23" eia rack. the vertical channels shall have side and front pass through holes. the vertical channels shall have slots that can accommodate plastic d-rings, plastic bend radius fingers and spools to provide vertical cable management. the rear of the channel shall have an unequal flange design that allows access to cables inside the channel. the top of the rack shall have integral waterfalls that feed to the front and center of the vertical channels. the rack shall be capable of accepting steel, full length, hinged doors. rack construction method shall ensure an electrically bonded structure for ease of grounding. the n et f rame ? cable management rack system is designed to support heavy networking equipment and can be used in cross-connect and interconnect applications in a telecommunications room. the n et f rame ? system is completely modular and can manage high performance copper and fiber patch cables. this modular rack system is compatible with the panduit horizontal cable management panels, including the n et m anager ? cable manager, p atch l ink , ? and o pen -a ccess ? d-ring options, o pticom ? fiber optic enclosures and m ini -c om ? patch panels. n et f rame ? rack system 19" or 23" x 7': nfr84 ? specification sheet n et f rame ? cable management rack system n et f rame ? vertical cable management options 4" x 6"d-ring kit (8): nfdr4x6k center d-ring kit (16): nfcdrk bend radius finger kit (8): nfbrfk fiber slack spool: nfsk n et f rame ? shelves 19"w x 18"d: nfshlf19x18 19"w x 25"d: nfshlf19x25 n et f rame ? accessories hinged metal door (4" x 7'): nfd484 (8" x 7'): nfd884 (12" x 7'): nfd1284 ladder rack bracket: nflrb end panel: nfep slack manager: nfvsm4 troughs 19" lower with 1.3" bend radius: cmlt19 19" upper: cmut19 19" lower: cmt4 power strips 19" horizontal 15 a: CMRPSH15 20 a: cmrpsh20 power strips 19" vertical 39" single circuit: cmrpsv20 66" dual circuit: cmrpsvd20
n et f rame ? cable management rack system ?2006 panduit corp. all rights reserved. printed in u.s.a. ww-rksp01 10/2006 nfr84 ? n et f rame ? 19" equipment rack, 45 ru hinged doors nflrb ? ladder rack support bracket, for parallel and perpendicular attachment of ladder rack nfbrfk ? vertical cable management, kit of (8) bend radius fingers nfep ? end panel ncmhaef4 ? cable pathway nfd884 ? dual hinge, 8" wide for use in covering two adjacent pathways nfd484 ? single hinge, 4" wide worldwide subsidiaries and sales offices for a copy of panduit product warranties, log on to www.panduit.com/warranty panduit canada markham, ontario cs-cdn@panduit.com phone: 800.777.3300 panduit europe ltd. london, uk cs-emea@panduit.com phone: 44.20.8601.7200 panduit japan tokyo, japan cs-japan@panduit.com phone: 81.3.3767.7011 panduit singapore pte. ltd. republic of singapore cs-ap@panduit.com phone: 65.6379.6700 panduit australia pty. ltd. victoria, australia cs-aus@panduit.com phone: 61.3.9794.9020 panduit latin america jalisco, mexico cs-la@panduit.com phone: 52.333.777.6000 contact customer service by email: cs@panduit.com or by phone: 800-777-3300 and reference rksp01 visit us at www.panduit.com for more information 1 2 3b 3a 4 5 6 1 2 3b 3a 5 6 4
|
